Basic Salt Spray Test Chamber (S-750)
Basic Salt Spray Test Chamber (S-750)
Basic Salt Spray Test Chamber
LIB basic salt spray chambers meet the requirements of basic and continuous salt spray tests, such as ASTM B117, ISO 9227 and similar international test standards, and can perform NSS, ASS and CASS test.
Specification For Basic Salt Spray Test Chamber
Provide a large selection of salt spray chambers to accommodate various types of product testing. Capacity available in 108L, 320L, 410L, 780L, 1000L, 1600L and more. More than 16 different models allow you to choose the size and performance best suited for your test application.
| Model | S-150 | S-250 | S-750 | S-010 | S-016 | S-020 |
| Internal dimensions (mm) | 590*470*400 | 1000*640*500 | 1100*750*500 | 1000*1300*600 | 900*1600*720 | 1000*2000*800 |
| Overall dimensions (mm) | 1460*760*1140 | 1850*960*1350 | 1950*1030*1350 | 2000×1300×1600 | 2300×1300×1700 | 2700×1300×1900 |
| Interior Volume (L) | 110 | 320 | 410 | 780 | 1030 | 1600 |
| Temperature Range | Ambient ¡« +60 ¡æ | |||||
| Temperature Fluctuation | ± 0.5 ¡æ | |||||
| Temperature Deviation | ± 2.0 ¡æ | |||||
| Humidity Range | 95% ~ 98% RH | |||||
| Salt Fog Deposition | 1¡«2ml / 80cm2 · h | |||||
| Spray Type | Continuous / Periodic | |||||
| Salt Fog Collected | Fog collector and fog measure cylinder | |||||
| Air Preheating | Saturated air barrel | |||||
| Spraying System | Atomizer tower and Spray nozzles | |||||
| Controller | PID controller | |||||
| Safety Device | Humidifier Dry-combustion Protection; Over-temperature Protection; Over-current Protection; Water Shortage Protection; Earth leakage Protection | |||||
| Material | Glass fiber reinforced plastics | |||||
| Standard Configuration | 6 round bars and 5 V-shaped grooves | |||||
Corrosion-resistant and Long-life Materials
Material is glass fiber reinforced plastics which has strong corrosion resistance, one-time forming, reinforced design, long service life and high temperature resistance.
Salt Solution Mixing System
A salt water stirring system is installed in the salt water tank, which can not only stir the salt water to maintain uniformity, but also heat the salt water to stabilize the pH value.
Environmentally Friendly Heat Insulation Treatment
The insulation layer at the bottom of the test chamber is made of clay board, which can efficiently heat insulation and is environmentally friendly.
