Servo- Pneumatic Universal Testing Machine
Key Features:
Specifications
- Low cost dynamic loading universal test system ideally suited to testing asphalt and unbound granular materials.
- Double acting low friction actuator with integral stroke transducer
- High performance ceramic spool servo-valve
- High quality stainless steel frame
- Issued with ceritificate of calibration for EN 12697-24;EN 12697, EN 12697-26
- Accessories available to perform a range of standard and non standard test methods
- Assessment of resistance to permanent deformation (rutting)
- Measurement of stiffness modulus
- Assessment of resistance to fatigue cracking
- Resilient modulus of unbound materials
- Mix design
Specifications
| Maximum Load | Electronically limited to 15.5kN |
| Load Transducer | ±20kN |
| Actuator Stroke mm | 30 |
| Frequency Hz | 0 to 30 |
| Electrical Supply | 220-240 Volts 50 Hz @ 13A |
| Compressed Air | 7-10 bar at 600 L/min |
| Dimension mm (WxDxH) |
Frame 360 x 400 x 740 Control Box 360 x 280 x 140 |
| Working space required mm (WxDxH) | 825 x 1650 x 2100 when fitted in Cabinet CRT-TCC |
| Weight (Approx.) KG |
Frame 30 Control Box 6 |
| PC | Included |
