The PCE-2000N hardness tester from PCE-Instruments uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, hits a test surface at a defined impact energy. The impact of the hard metal ball on the test surface results in a plastic deformation of the surface at the point of impact. This deformation results in an energy loss which is proportional to the hardness of the workpiece and which can be determined by means of the ratio of rebound to impact velocity of the specimen.
 

ISO CAL OPTION :

• Various other impactors as accessories
• Measurement in different angles possible
• Readings are saved to USB pen drive
• External impact device with 1.5 m cable
• Wide measurement range
• 6 different hardness scales