STS-1 has been studied and developed to be able to test the opening and closing force of swing top stopper on bottles.
The STS-1 includes two accurate dynamometer testers and semi-automatic cycle.
Testing position is adjustable. And it’s been designed for testing different height of bottles.
Features:
-
Easy to use
-
High repeatability in testing
-
Built-in dynamometer with software
Step to perform test:
-
Install the bottleinto the clamp and adjust the swing top stopper position to make it right against the testing heads of both dynamometer, then tighten the clamp.
-
Adjust the dynamometer position according to the swing top stopper.
-
Move the pneumatic valve of opening force testing to testing position and the pull system will test at a stable speed and dynamometer will measure the force. Return the dynamometer to its initial position, then move the pneumatic valve back to standby position when test is done.
-
Move the pneumatic valve of closing force testing to testing position and the compress system will test at a stable speed and dynamometer will measure the force. Return the dynamometer to its initial position, then move the pneumatic valve back to standby position when test is done.
Dynamometers specifications:
-
Range: 0-50/ 0-100 / 0-200 N (Please specify when ordering)
-
Measure tensile & compressive strain
-
Digital display and reversible
-
Programming menu.
-
Measurement Mode Continuous / Peak / PC Link
-
Recalibration of the zero touch
-
Accuracy: 0.01 N (0-50N) / 0.05 N (0-100N) / 0.1N (0-200N)
-
Display threshold (limit)
-
Choice of unit: kgf. / Lbf / N
-
Integrated battery with charge
-
Data will be transferred to the software with curve
Machanical specifications :
-
Air supply : 0 – 6 bar
-
Dimensions:700 x 350 x 650 mm
-
Net weight:21 KG
