Airborne Particle-Counting Hygiene Meter PCE-RCM 12
Airborne Particle-Counting Hygiene Meter PCE-RCM 12 Particle Counter Environmental Testing Systems Kuala Lumpur (KL), Malaysia, Selangor, Penang Supplier, Suppliers, Supply, Supplies | Redmark Industry Sdn Bhd
Airborne Particle-Counting Hygiene Meter PCE-RCM 12

Air quality monitor for indicative measurement of environmental conditions / Determination of CO2, HCHO, particulate matter (PM2.5 / PM10) /  Temperature und relative humidity / 3'' TFT LCD Display

 

The airborne particle-counting hygiene meter PCE-RCM 12 is used for indicative testing of environmental parameters. The airborne particle-counting hygiene meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the airborne particle-counting hygiene meter provides information about these parameters. Environmental monitoring can be done continuously with the airborne particle-counting hygiene meter for up to five hours without the device being connected to a power source.

For permanent measurement, the hygiene meter can be connected to AC power via a USB interface. The rechargeable battery will be recharged within two hours if the air quality monitor is turned off. When measuring carbon dioxide, the meter has a wide measuring range from 0 to 9,999 ppm. The display of the concentrations is further facilitated by the use of a color rating scale, as this provides direct information about the air quality to the user.

In addition to the indicative measurement of formaldehyde, which can be harmful to health, an indicative measurement of particulate matter pollution can also be carried out. A distinction is made between particles with a maximum diameter of up to 10 μm (PM10) and particles up to a diameter of 2.5 μm (PM2.5).


- Measurement of CO2 and formaldehyde
- Indication of room temperature and humidity
- Particulate matter measurement (PM2.5 / PM10)
- Large CO2 measurement range up to 9999 ppm
- Changing display of the measured values
- Memory for up to 5000 measuring groups
- Date and time display
- 3'' large TFT-LCD display
- Safe and easy handling


Specifications

Mass concentration  
Measurable particle sizes PM2.5 / PM10
Measuring range PM 2.5 0 ... 1000 µg/m³
Resolution 1 µm
Accuracy PM 2.5 0 ... 100 µg/m³: ±10 µg/m³
  101 ... 1000 µg/m³: ±10% of measured value
   
Particle counter  
Measurable particle sizes 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Resolution 1 µm
Accuracy reference measurement
Number of maximum particles 2,000,000 particles/L
   
Temperature  
Measuring range -10 ... 60 °C, 14 ... 140 °F
Resolution 0.01 °C, °F
Accuracy ±2 °C, ±3.6 °F
   
Humidity (RH)  
Measuring range 0 ... 100 %
Resolution 0.01 %
Accuracy ±3 %
   
Further specifications  
Response time 1 second
Warm up 10 seconds
Mounting connection 1/4'' tripod connection
Dimensions intake outside: Ø13 mm / 0.51''
  inside: Ø7 mm / 0.27''
  height: 35 mm / 1.37''
   
Display 3.2'' LC color display
Power supply (mains adapter)   primary: 100 ... 240 V AC, 50 / 60 Hz, 0.3 A
  secondary: 5 V DC, 2 A
Power supply (battery) 3.7 V, 8.14 Wh, 18650
Battery life ca. 9 hours
Interface Micro USB for charging and for data transfer to a PC
Auto power off turned off
  15, 30, 45 minutes
  1, 2, 4, 8 hours
Data memory flash memory for approx. 12 measurement runs
  a measurement run contains 999 measurement points
Storage interval 10, 30 seconds
  1, 5, 10, 30, 60 minutes
Dimensions 222 x 80 x 46 mm / 8.7 x 3.1 x 1.8''
Weight 320 g / 11.2 oz

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version