Falling Sand Abrasion Testers
Falling Sand Abrasion Testers Impact / Abrasion Color & Coating Kuala Lumpur (KL), Malaysia, Selangor, Penang Supplier, Suppliers, Supply, Supplies | Redmark Industry Sdn Bhd
BGD 529 Falling Sand Abrasion Tester is designed according to ASTM D 968. It’s applicable to determine abrasion resistance performance of organic coating. Abrasive is allowed to fall from a specified height through a guide tube onto a coated panel until the substrate becomes visible. The amount of abrasive per unit film thickness is reported as the abrasion resistance of the coating on the panel
.

¡ô Funnel with fan-shaped swithch is more convenient to operate
¡ô The distance between guide tube and specimen holder is calibrated by special tool which comes which tester, more precise.
¡ô Funnel installation height can be adjusted freely by below bearing.

Main Technical Parameters

 

¡ö Overall dimensions£º230mm×200mm×1500mm£¨length by width by height£©
¡ö Length of conduct pipe£º36 inch£¨914mm£©
¡ö Inner diameter£º0.75 inch£¨19mm£©
¡ö Volume of hopper£º3L
¡ö Weight of whole machine£º25KG

¡ö Ordering Information£º

BGD 529---Falling Sand Abrasion Tester

 

BGD 1370---Standard Sand (25kg/package)

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version