Hamburg (Immersion) Wheel Tracker
Key Features
- Able to perform AASHTO-T324 and EN 12697-22
- State of the art software which provides higher level users with options, and lab technicians ease of use
- Advanced machine with 4 testing modes: Wet,Wet Heat,Dry and Dry heat (with optional heating hood)
- A mechanical re-circulation water bath controls the temperature to within ± 0.5°C in a range of (20-75) ºC
- Variabl speed range between 15 and 30RPM
- Two displacement transducers attached to the wheel support arms measure the depth of the ruts as they develop with a resoultion of 0.01mm to a maximum rut depth of 50mm
- The depth of the rut is measured automatically and constantly as specified in the AASHTO and EN Standards
- Rubber or stainless steel wheels, and various widths to alter the applied pressure
- Various mould options including laboratory compacted and cores (AASHTO and EN)
- UKAS Certificate supplied
- Investigation of resistance to rutting
- Investigation of moisture susceptibility
- Testing of laboratory compacted slabs
- Testing of field cores
- Porduction of creep slope, stripping inflection point and stripping slope
| Wheel Speed | Variable up to 30 cycles (60 passes per minute |
| Wheel Load | 700 ± 10 N |
| Load Cell kN | 250 |
| Mould Dimensions mm | 305 x 305 and 305 x 400 (Others available, please contact us or see accessories) |
| Slab Thickness mm | 50 -100 (Different thicknesses can be tested with spacers) |
| Rut Depth Transducer Range | 50 mm |
| Temperature Range | 20 - 75 ºC |
| Electrical Supply | 380-415 Volts 50Hz @ 16A |
| Dimension mm (W x D x H) | 1430 x 1380 x 1260 |
| Estimated Weight Kg | 687 |
| PC | Included |
